English

Litharollo tsa lisebelisoa tsa bongaka

Lisebelisoa tsa ho buoa mochini oa ho itšeha oa laser axis tse hlano YC-TLM500 Featured Image
  • Lisebelisoa tsa ho buoa tse hlano axis laser cutting machine YC-TLM500

Lisebelisoa tsa ho buoa tse hlano axis laser cutting machine YC-TLM500

Tlhaloso e Khutšoanyane:

Mochini oa ho buoa oa laser ea YC-TLM500 o sebelisoa haholo bakeng sa laser micromachining ea endoscope e thata, endoscope, stapler, stapler, thipa ea ultrasonic, drill e bonolo, planer, nale ea ho phunya, ho phunya nko le lisebelisoa tse ling tsa ho buoa le tsa masapo.


  • Bophara bo bonyenyane ba seam:18 ~ 30um
  • Ho nepahala ha mochini o phahameng:≤± 10um
  • Boleng bo botle ba ho seha:Ha ho na mapheo a mahoashe, ho phunyeha ho boreleli
  • Ho sebetsa hantle haholo:nako e le 'ngoe ho khaola leboteng le lehlakoreng, ts'ebetso e tsoelang pele ea phepelo ea lijo

    • Lintlha tsa Sehlahisoa

    TheknolojiPli-arameter:

    Lebelo le Leholo la Tshebetso 500mm/s(X1);500mm/s(Y1/Y2);50mm/s(Z);
    Boemo bo Nepahetseng ±3um(X1);±3um(Y1/Y2);±5um(Z);
    Ho Feta Position Ho Nepaha ±1um(X1);±1um(Y1/Y2);±3um(Z)
    Lisebelisoa tsa mochini 304&316L&Ni-Ti&L605&Al&Gu&Li&Mg&Fe joalo-joalo.
    Lethathamo la tšebetso ea sefofane 450mm * 600mm
    Mofuta oa laser Fiber laser;
    Laser wavelength 1030-1070±10nm;
    matla a laser 200W&250W&300W&500W&1000W&QCW150W bakeng sa khetho;
    Phepelo ea motlakase ea lisebelisoa 220V± 10%, 50Hz;AC 25A (sekhechana se seholo sa potoloho);
    Sebopeho sa faele DXF&DWG&STP&IGS;
    Litekanyo tsa lisebelisoa 1280mmx1320mmx1600mm;
    Boima ba lisebelisoa 1500Kg.
    TLM500

    TLM500

    Ho ikamahanya le maemo ho matla
    ① Ka ho itšeha ka laser, ho itšeha le ho phunya le ho phunya le ho betla le tse ling tse ntle tsa machining
    ② Centripetal & vertical & vertical & compant open feature machining bakeng sa ho tšehetsa tube e lekanang le bophara ba tube le seletsa sa sefofane
    ③E ka sebetsana le 304&316l&Ni-Ti&L605&Al&Gu&Li&Mg&Fe le lisebelisoa tse ling
    ④ E lumellana le mofuta o nepahetseng oa mofuta oa D chuck & ER series chuck & three-jaw chuck le tse ling tse nepahetseng tse tšesaane tse nang le marako a li-tube clamping system.
    ⑤ Amohela sistimi ea ts'ehetso ea li-tube shaft sleeve e nepahetseng e kopantsoeng hantle e nang le sebopeho se ikamahanyang le maemo.
    ⑥Fana ka moralo o ts'oanang oa ho nepahala ha li-tube tse tšesaane tse nang le marako a tsoelang pele ho sebetsa le ho kenya le ho laolla
    ⑦ E na le sistimi e iketselitseng ea 2D & 2.5D & 3D CAM ea laser micromachining
    Sebaka sa kopo:
    Laser micromachining ea lisebelisoa tsa ho buoa le tsa masapo tse kang endoscope e thata & ultrasonic scalpel & endoscope& stapler & suture device & soft drill & planer & puncture nale & nose drill
    Mochine o nepahetseng haholo:
    ①Bophara bo bonyenyane ba seam: 18 ~ 30um
    ②Ho nepahala ha mochini o phahameng: ≤ ± 10um
    ③Boleng bo botle ba ho seha: ha ho burr le ho seha ho boreleli
    ④Bokhoni bo phahameng ba mochini: ho seha hanngoe ka lebota le lehlakoreng le le leng le mochini o tsoelang pele oa phepelo

    KOKO-2

    Moqapi o feto-fetohang
    ① Latela mohopolo oa moralo oa ergonomics, o bobebe ebile o khuts'oane
    ②Fana ka ts'ebetso ea boikhethelo ea sistimi ea pono ea mochini ho lekola ts'ebetso ea machining ea laser ka nako ea nnete.
    ③ Ts'ebetso ea software le ea Hardware e tsamaellana habonolo, e ts'ehetsa tlhophiso ea ts'ebetso ea motho ka mong le taolo e bohlale ea tlhahiso.
    ④Tsehetsa moralo o mocha ho tloha boemong ba karolo ho isa boemong ba sistimi
    ⑤ Taolo ea mofuta o bulehileng le sistimi ea laser micromachining e bonolo ho sebetsa le sebopeho se hlakileng

  • E fetileng:
  • E 'ngoe:
    • Ngola molaetsa wa hao mona mme o re romele wona

    Litaba tse amanang le tsona

    Tobetsa Enter ho batla kapa ESC ho koala